Apollo VP200, Руководство пользователя

Страница: 26 / 30

E
T
E
E
O
P
RA
IO
N
G
N
RA
L
2. Insert the transformer input plug into a 120volt, 60Hz receptacle.
3. Insert the receiver, with battery into the charger compartment
with the belt clip facing toward the back of the charger. Push the
receiver all the way down until the belt clip latches and an
audible snap or click is heard.
4. When a pager is inserted in the charger, the PAGER indicator
lights on. When the charging process begins, the PAGER
indicator light will be blinking. When the charging process is
complete, the PAGER indicator light will change, in color, from
red to green.
5. To remove the VP200 alert monitor receiver, press the upper
end of the belt clip and lift the receiver out.
6. To charge a spare battery, place the battery into the spare
battery slot and push down until a snap or click is heard. When
the battery is inserted into the charger, the BATTERY indicator
lights on . When the charging process begins, the BATTERY
indicator light will be blinking. When the charging process is
complete, the PAGER indicator light will change, in color, from
red to green. Removing the batteries after charging (see the
below picture ).
X
X
X
X
24