SLOT THE LEG RODS (G) INTO THE LOCATING HOLE IN THE
SIE OF THE LEG TUBES.
TAKING THE OAK SHELF WITH REAR STOP BAR (F), LINE UP
THE
“
H
”
SHAPPED LEGS (WITH THE CROSSBAR HAVING THE
BIGGER GAP TOWARDS THE SHELF) ON THE SIDE WITH THE
STOP BAR FACING TOWARDS THE LEGS.
PLACE THE ASSEMBLED LOWER LEGS STUD THROUGH THE
SHELF AND SCREW INTO THE LEG TUBES. REPEAT THE
PROCESS WITH ALL 4 LOWER LEGS.
LINE UP THE TOP OAK SHELF (K) TO THE LEG
TUBES, ONCE IN POSITION SCREW IN THE LEG
BOLTS (H) WITH TH HEX KEY SUPPLIED.
FIT BADGE.
THESE INSTRUCTIONS ASSUME YOU WILL BE USING THE MODULE FOR
12”
VINYL STORAGE. THIS
MODULE CAN BE ADAPTED TO STORE HIFI COMPONENTS IF REQUIRED. THE REAR OAK STOP BAR CAN
EASILY BE REMOVED BY REMOVINGTHE RETAINING SCREWS LOCATED UNDERNEATH THE LOWER
SHELF. THE LEG RODS (G) CAN ALSO BE DESCARDED IF PREFERED.
UP TO 4 ADDITIONAL APOLLO STORM 6 SHELF MODULES CAN BE STACKED ON TOP OF THE VINYL
STORAGE MODULE IF REQUIRED.
ONE SET OF 4 ATACAMA/APOLLO HD
-
L SPIKE SHOES ARE RECOMMENDED SHOULD THE MODULE BE
POSITIONED ON A DELICATE FLOOR COVERING TO PROTECT THE SURFACE FROM THE ISOLATION
SPIKES.
Please Note:
-
Oak is a natural material, so block colour variation, knots and grain texture
is part of the intrinsic beauty of this hifi support. Every module is aesthetically unique
and will darken over time as part of the woods ageing process, especially if exposed to
sunlight. This difference will be enhanced should you add new extra shelving at a later
date, so where possible purchase your Apollo Storm as a complete matched set taking
into account your future storage requirements.
210618
WE OPERATE A POLICY OF CONTINUOUS IMPROVEMENT AND RESERVE THE RIGHT TO AMEND DESIGNS AND SPECIFICATIONS WITHOUT PRIOR NOTICE.
