6
5
Smart Move
®
Vertical Operation
(DMX Version)
The Smart Move
®
Vertical
is powered by 24V DC. Power, along
with DMX data, enter the unit via the two 4 pin XLR connectors
located on the top of the enclosure. Route the XLR cables in such
a way as to avoid contact with the lighting fixture.
Four sizes of Smart Power
™
supplies are available from Apollo.
Smart Power
™
75W will power 5 Smart Move
®
Verticals
Smart Power
™
200W will power 13 Smart Move
®
Verticals
Smart Power
™
400W will power 26 Smart Move
®
Verticals
Smart Power
™
600W will power 40 Smart Move
®
Verticals
The Smart Move
®
Vertical
is also compatible with the following
power supplies:
• Spectra-Q
• Chroma-Q
• Rainbow
• Wybron Forerunner
The Smart Move
®
Vertical
is not compatible with Wybron
Coloram power supplies!
This is particularly important when operating the Smart
Move
®
Vertical or Smart Move
®
Vertical DMX in any
orientation other than vertical.
Smart Move
®
Vertical Operation
(Standard Version)
The Smart Move
®
Vertical is powered by a 24V DC adapter
supplied with the unit. It can be plugged into any 120 volt outlet
for smooth operation. The
600mA power adapter is a rugged,
black plastic molded unit with a ¼
inch heavy duty audio-style jack for
long life. Route the power supply
cable in such a way as to avoid
contact with the lighting fixture.
Do not plug the Smart Move
®
Vertical into a dimmable source.
The speed of the Smart Move
®
Vertical is controlled only by the
black speed control knob on the
side of the enclosure.
After powering up, the Smart Move
®
Vertical will perform a homing
sequence. After homing is completed,
usually in no more than a few seconds,
the Vertical is ready to use. Set the
two rotary switches on the side of the
enclosure to 1 of 17 preprogrammed
effects. Adjust the speed of the effect
using the black speed control knob on
the side of the enclosure.
1/4” Audio-Style Power Jack
Speed Dial Control
Rotary Switches
