6
9
[ Addressing ]
[ Fan ]
[
6
]
· Each SMART COLOR
®
PRO can respond to a unique start address . To change the
DMX address press the SELECT, UP or DOWN button once . “Addr” will
appear . Press SELECT to select the addressing mode . Pushing the UP and
DOWN buttons will step through DMX addresses . The addresses advance
slowly for the first three seconds while holding the UP or DOWN button .
After the first three seconds the DMX addresses advance or retreat at a
much faster rate .
· After the desired DMX start address appears in the LED window, press SELECT
to set the address .
· The SMART COLOR® PRO is a two channel device if fan speed is set to “PL1 .” The
first channel controls the gel string, and the second channel controls the fan
speed .
· The LED display will show “Addr” when the addressing sequence is complete .
· To change the fan speed press the SELECT, UP or DOWN button once . Press
the DOWN button once . “FAn” will appear . Press the SELECT button to select
fan control mode .
· Press the UP or DOWN button to scroll through the fan options .
· Selecting “=_1_” will set the fan to run constantly at low speed . Use this setting
when the SMART COLOR
®
PRO is being used with low wattage fixtures or in
situations requiring quiet operation .
· Selecting “=–2–” will set the fan to run constantly at medium speed .
· Selecting “=¯3¯” will set the fan to run constantly at high speed . Use this setting
when the SMART COLOR
®
PRO is being used on high wattage fixtures or when
maximum cooling is required .
· Selecting “=PL1” will set the fan to be controlled at the SMART COLOR
®
PRO’s DMX
start address plus 1 . For example, if the start address for the SMART COLOR
®
PRO
is channel 001, the fan will be controlled by channel 002 . With the fader for
channel 002 at 100% the fan will operate low speed .
· Selecting “=512” will set the fan to be controlled by DMX channel 512 . Again,
with the fader at 0% the fan will operate at high speed . With the fader at 100%
the fan will operate at low speed .
· Press the SELECT button to set fan speed .
[
9
]
[ Gel String Information Continued ]
24 FRAMES
1
0 0
2
012 5
3
024 10
4
036 14
5
047 19
6
058 23
7
069 28
8
080 32
9
091 36
10
101 40
11
112 44
12
122 48
13
133 52
14
143 57
15
153 61
16
164 65
17
175 69
18
186 73
19
197
78
20
208
82
21
220
87
22
232
91
23
244
96
24
255
100
DMX
Value
0 - 255
Console
Value
%
Frame
Position
· All 24 frame gel strings
are custom and intended for
the Smart Color
®
Pro 5 .25
and Smart Color
®
Pro 7 .25 .
· The SMART COLOR
®
PRO 10
cannot accept a 24 frame
gel string .