6
ENG
WIRING DIAGRAM
Before speaker installation turn off the main unit.
During the installation, use speakers with an impedance of 4-8 ohms.
Do not connect the speaker terminals to the car's coachwork.
Do not connect the ground wire (GND) of the car audio system to the speaker terminal (-).
Do not connect speakers in parallel.
Connect only passive speakers.
Active speakers connected to the speaker terminals (with built-in amplifiers) may damage the
car audio system.
Do not connect car audio speaker wire outputs to each other.
If the yellow wire is connected to the power (B+), memory circuit will be powered continuously,
even after the ignition is switched off.
