5
ENG
DESCRIPTION OF BATH SCALE “IDEO”
1.
LCD
DISPLAY
2.
R
UBBER SUPPORTS
3.
B
ATTERIES COMPARTMENT
4.
W
EIGHT UNIT SWITCH
(
KG
/
ST
/
LB
)
TECHNICAL DATA
„IDEO” BATH SCALE. Model WLI-150-CLR.
Capacity …………………6kg-150 kg ( 330 lb.)
Division ………………….100 g/0.2lb
Power…………………….1x CR2032 ( 3 V ) lithium battery
The battery is not part of the unit.
„NUMER PARTII” which is located on the rating plate of the product means the serial number.
Recommended working environment: temperature :0°C - 40°C / 32°F - 104°F. Relative humidity
<85%
The present appliance is conformant with the European directive 2004/108/WE
SAFETY
WARNING:
THIS
PRODUCT
IS
NOT
A
MEDICAL
DEVICE.
6
ENG
BEFORE FIRST USE
•
After unpacking the original packaging, be sure that all parts of bath scale “Ideo” are not
damaged.
•
Your new electronic personal scales have been designed to accurately indicate your weight gain
or loss over a period of time and should give you many years of service under normal use.
POWER SUPLLY
•
Open the battery compartment on the back of the scale LCD display.
•
Insert a new battery, so that was blocked by the latch.
•
Do not bend the contacts back while you do this, or they may break.
•
To remove the battery please look at picture below ( see the arrow direction ).
•
Close the battery compartment cover.
NOTE: Scale “Ideo” is equipped with battery level indicator. When the batteries need
replacing the following will appear on the screen: LO.
USING “IDEO” BATH SCALE
•
Place your scales on a hard flat surface will ensure the greatest accuracy and repeatability.
•
Always weigh yourself on the same scale placed on the same floor surface. Uneven floors may
affect the readings.
•
Always weigh yourself without clothing or footwear, and before meals. The first thing in the
morning is the best time.
•
Your scales round up or down to the nearest 100g
THE RISK OF SLIPPING!
DO NOT STAND ON SCALE WITH YOUR WET FEET.
MEASUREMENT BY “IDEO” BATH SCALE
•
Put the scales on a hard flat surface(avoiding carpets or any soft surface).
•
Switch on the scales by with a slight tap on the glass platform near LCD display. Then wait a few
seconds, the following will appear.
