Apollo Advantage 6000 Series, Руководство по эксплуатации

Страница: 39 / 61

Revision 5 - 39 - November 2017
Air Spa Cleaning Procedure
Your Apollo Advantage™ Bathing System arrived with an Advantage™ Intro Pack which
includes Turbo Clean™ Pre-disinfectant Chelating Detergent. Turbo Clean™ is used after each
bath to remove residue, bacteria and gross soils. Your Advantage™ Bathing System is calibrated
to dilute Turbo Clean™ at the exact mixture stipulated by the manufacturer’s instructions. Use of
other cleaners is not recommended and could compromise the overall process.
Air Spa Bath Cleaning Process
Place the chair in the tub, release the carrier
from the tub, and close the door.
NOTICE – TURN ON BLOWER FIRST BEFORE USING DISINFECTING SYSTEM:
FAILURE TO FOLLOW INSTRUCTIONS MAY RESULT IN DAMAGE TO
INTERNAL PARTS.
Close the Tub Drain. Turn the Blower on.
Turn the Selector Knob to "TUB CLEANER"
and the Control Knob to "On." After the Turbo
Clean™ mixture has come out of the outlets
for about 30 seconds or when there is about 2
inches of cleaning solution in the foot well;
turn the Selector Knob to "Rinse."
Lift seat bottom off chair, (pull up from back
of seat). Use the cleaning solution to scrub the
tub, chair and underneath seat bottom. When
clear water comes out of all outlets, turn the
Control Knob to "Off." Open the Tub Drain.
Leave the Blower on for 60 seconds to force
the remaining clear water out of the air lines.
Turn the Blower off. Use the shower wand to
rinse the tub and chair.