Apogee DAX 3, Руководство пользователя

Страница: 6 / 11

Remove all speaker cables from the Diva passive crossover. Carefully turn the Diva passive crossover
upside down and remove the bottom cover by unscrewing ten machine screws with the alien wrench
provided. Refer to Diagram #2 regarding the following procedures. Table 3 summarizes terminal and
wire connections:
TABLE 3: DIVA
WOOFER(SPK) MIDRANGE(SPK) TWEETER(SPK)
Binding Posts RED BLACK RED BLACK RED BLACK
Standard Wiring
BLUE, BLACK RED, GREEN, ORANGE, GREEN
(Passive X-over) YELLOW, L3, L3 L4, L4
RED YELLOW PURPLE
Active Crossover
BLUE WHITE L5 GREY ORANGE GREEN,
L4, L
4
PURPLE
WOOFER(AMP) MIDRANGE/TWEETER(AMP)
Binding Posts RED BLACK RED BLACK
Standard Wiring
L1 BLACK ORANGE (2) GREEN
(Passive X-over)
Active Crossover
BLUE WHITE ORANGE GREEN,
L5 GREY
Woofer Wiring:
a. Remove and insulate RED and YELLOW wires from WOOFER RED SPEAKER BINDING POST
and leave BLUE wire connected. Insulate wire with heatshrink tubing or electrical tape. Remove
heatshrink from other end of unconnected BLUE wire.
b. Remove and insulate solid copper L1 coil wire from WOOFER RED AMPLIFIER BINDING POST
and connect loose end of BLUE wire to WOOFER RED AMPLIFIER BINDING POST.
c. Remove and insulate BLACK wire from WOOFER BLACK AMPLIFIER AND SPEAKER BINDING
POSTS.
d. Connect WHITE wire included in the kit between WOOFER BLACK AMPLIFIER AND SPEAKER
BINDING POSTS.