6
STORAGE (CLOSING)
To securely close your ADAPT-X
TM
trailer and avoid any damages to it,
please carefully follow the instructions below.
OBSERVATION:
First close the rear section then the front section.
The closing operations must be performed on a flat surface.
1. HITCH PINS
Remove both hitch pins from the front section and both hitch pins from the rear
section.
Fig. 1
and
Fig. 2
2. CLOSING THE REAR SECTION
To close the rear section follow the instructions below. If necessary, consult
Figures 3
to
6
.
2.1.
Standing behind the trailer, check if the hitch pins in the tailgate are in
position then lift up the rear section.
Fig. 2
,
Fig. 3
and
Fig. 4
CAUTION:
If the tailgate pins are not in position, the tailgate may open when you attempt
to lift up the rear section.
2.2.
Put the hitch pins in their corresponding storage location.
Fig. 5
and
Fig. 6
WARNING:
Always check that the hitch pins are in their proper position when the trailer is
in the closed or open position.
Содержание Adapt-X 300
