2. Release the power button when the lights turn off.
3. Your BatLure is now off.
Setting the volume
1. Power the BatLure.
2. Push the volume buttons to increase or decrease the volume level.
3. The volume led’s will light up according to the volume setting for 2 seconds.
* Digital amplification
and
Clipping:
In normal operating mode the volume led`s are green. When using digital amplification the
led`s are red. Digital amplification is a useful feature to play files that are recorded on a low
amplitude level; however the possibility of clipping appears when enabling this feature.
Clipping of the audio signal will be signaled by the “clipping led” lighting up red. Whenever this
happens it is suggested to decrease the volume level to preserve audio quality.
Reading the battery status
1. Power the BatLure.
2. Push the power button briefly.
3. The volume led’s will light up according to the current battery status.
There is a small difference in the reported battery status of rechargeable and non-
rechargeable batteries. Rechargeable batteries tend to report a little less capacity than they
really have. This does not shorten the operating time of the BatLure.
Preparing an SD card for your BatLure (a computer is needed)
1. Place the SD card in your computer and navigate to its location.
2. Copy-paste or drag-drop the files you want to play to the top-directory of the SD card.
3. You might want to edit the configuration file, otherwise remove the SD card (safe remove) and
place it back in the BatLure.
*Formatting your SD card
It is preferred to format your SD card before using it: this will make sure you will not
experience any playback difficulties. Use a FAT, FAT16 or FAT32 file system.
o
On Mac: Open the “Disk Utility” application and select your SD card. Select “Erase”
from the menu, then choose “FAT”.
Version: 2014-11-18
Содержание BatLure
Страница 2: ...Layout Version 2014 11 18...
