APlusLift HW-10KBP, Руководство по установке и эксплуатации

Страница: 9 / 19

Step 3 (Installing Equalizing Cables)

Take the equalizer cables. Using vise grips and a socket, tighten the cable nut half way
down the threads.

Stand in front of each carriage and find two holes on the top of the carriage.

Take the threaded end (the end without nut) and run it up inside the carriage through
the front hole on the right side of the carriage. See figures below for cable routing. Do
not tighten cables at this time. Just start them on the treads.
9