Wrong wire connection may cause malfunction of some
electric components.After fixing cable, ensure that
An all-pole disconnection switch having a contact
separation of at least 3mm in all pole should be
connected in fixed wiring.
leads between connection to fixed point have some space.
2
.
3.
4.
5.
Remove the cable clamp, connect the power connection
1. Remove the handle at the right side plate of the
outdoor unit (one screw).
the connection. The fitting line distributing must be
Wiring should meet that of indoor unit.
Fix power connection wire by wire clamp.
Ensure wire has been fixed well.
Install the handle.
cable with the terminal at the row of connection and fix
consistent with the indoor unit. terminal of line bank.
ELECTRICAL CONNECTIONS
INSTALLER
The connect ion pipes and the connectiong wirings of
the unit A ,unit B,unit C and unit D must be corresponding
to each other respective.
The applian ce shall be in st alled in accordance wit h
national wiring regulations.
Do not install the outdoor unit where it is exposed
to the sunlight.
HANDLING
After having removed the packaging, check that the con-
tents are intact and complete.
The outdoor unit must always be kept upright.
Handling must be done by suitably e quipped qua lified
technical personnel using equipment that is
suitable
for
the weight of the a ppliance .
USER
Handle
Front
side plate
To the power supply
To unit B
To unit A
interconnection
cable
interconnection
cable
cord
Power
To unit C
interconnection
cable
To unit D
interconnection
cable
Outdoor unit
Indoor unit
L
L
AM4O-81HPDC1:
6
Содержание AM2O-51HPDC1
Страница 2: ......
