12
English
4.1 Key functions
5 Power supply
Use only a power supply, which meets the specifications of this device (DC 4.7-5.5V
/ 0.5-2A). Please note that the maximum charging current depends on the capacity
of the power supply.
6 Setting up
Take the device out of the package and remove all the packaging material. Attach
the supplied USB to microUSB cable to a properly connected power source (e.g.
power adapter of your mobile phone or your computer's USB port) and to the
battery charger. You can then insert the desired type of battery into the charger.
Caution!
Charge only rechargeable batteries. Please do not use non-rechargeable
batteries!
Various data such as the charging time, actual voltage and the charging status, is
shown in the display as soon as a battery is inserted. The actual charging current
is shown in the middle of the display. This can be adjusted between 500mA and
1000mA. Briefly press the "MODE" button to configure.
If you want to charge completely discharged batteries, it may be that the charging
process is more effective if you charge them using a lower charging current.
7 Cleaning and Maintenance
Disconnect the device from the mains and make sure that it is not carrying any
current. Wipe it using a dry and soft cloth. Please do not use aggressive cleaning
agents.
"MODE" key
Function
keep it pressed
Switching the display on and off (charging process continues)
press briefly
Alternate between 500mA and 1A charging current
