Aplex OPC-5XX7 Скачать руководство пользователя страница 38

Страница: 38 / 91

OPC-5XX7 User Manual

CPU C State Capability [C1] CPU Power-saving State Control
Execute Disable Bit [Enable] (Virus Protection Technology)

Hard Disk Boot Priority (IDE Storage Device Boot Priority)

This item is used to specify boot priority of IDE devices. Press "Enter" key for detailed setting.

Virus Warning

This item has two options: "Disabled" and "Enabled".

CPU L1 & L2 Cache

This item can be used to enable or disable the CPU’s primary (L1) or secondary (L2) cache. If set

to Enabled, operating speed of PC will be increased remarkably; if set to Disabled, the function will be
inactivated.

Hyper-Threading Technology

Enable and disable Intel's hyper-threading technology.

Quick Power On Self Test

This item is used to accelerate Power On Self Test (POST) process. If set to Enabled, BIOS will

shorten or skip some of its tests.

Enabled (default) Quick POST
Disabled Normal POST

First/Second/Third/Boot Other Device

BIOS will load the operating system according to the boot order of available devices. If disabled,

the function will be inactivated.

Boot Up NumLock Status (Default: On)

On (default) Keypad numeric keys remain valid
Off Keypad arrow keys remain valid

Gate A20 Option

Normal Gate A20 signal is controlled by keyboard controller or chipset hardware.
Fast (default) Gate A20 signal is controlled by port 92 or specific programs of chipset.

APIC Mode

It refers to an advanced interrupt controller mode to meet the requirements of multi-core CPU.

MPS Version Control For OS

This item is used to specify the multiprocessor specification version of the system. It is

recommended to keep the default value (1.4).

Содержание OPC-5XX7




























































































Результаты поиска

Содержание OPC-5XX7

Отзывы:

Похожие инструкции для OPC-5XX7

Бренды по названию

Популярные бренды

Aplex OPC-5XX7, Руководство пользователя

Результаты поиска

Содержание OPC-5XX7

Отзывы:

Похожие инструкции для OPC-5XX7

Бренды по названию

Популярные бренды