Aplex APC-3X97A Скачать руководство пользователя страница 30

Страница: 30 / 91

APC-3X97A user manual

Time (hh:mm:ss) 14 : 31: 6

Menu Level►

Change the day,

month, year and

century

►

IDE Channel 0 Master [None]

►

IDE Channel 0 Slave [None]

►

IDE Channel 1 Master [None]

►

IDE Channel 1 Slave [None]

Video [EGA/VGA]

Halt On [All, But

Keyboard]

Base Memory 639K

Extended Memory 1038336K

Total Memory 1039360K

↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help

F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

Date

This item allows you to set a desired system date (usually current date). The date format is

<day><month><date><year>.

Day

It is a read-only and bios-defined weekday attribute ranging from Sun (Sunday) to Sat

(Saturday).

Month

It is a month attribute ranging from Jan (January) to Dec (December).

Date

It is a date attribute ranging from 1 to 31 and can be modified via numeric keys.

Year

It is a user-defined year attribute.

Time

This item allows you to set a desired system time (usually current time). The time format is

<hour><minute><second>.

Channel 0 Master / Channel 0 Slave

Channel 1 Master / Channel 1 Slave

Press PgUp/<+> or PgDn/<-> key to select among Manual, None and Auto type. Note that the

specification of your drive device must be in compliance with the contents of Drive Table. If the

information registered in this item is not correct, your hard disk will not work properly; if your hard disk

specification is not found or does not conform to or the Driver Table, you may select Manual type to set

the specification manually.

If you choose Manual, you will be requested to enter relevant information in the following entries.

Keyboard input is also supported. For details, you may refer to the instructive materials provided by

distributor or device manufacturer.

If a SCSI HDD device is used, set this item to "NONE".

If a CD-ROM drive is connected to the HDD port, set this item to "NONE"

Содержание APC-3X97A




























































































Результаты поиска

Содержание APC-3X97A

Отзывы:

Бренды по названию

Популярные бренды

Aplex APC-3X97A, Руководство пользователя

Результаты поиска

Содержание APC-3X97A

Отзывы:

Бренды по названию

Популярные бренды