ACS-2320 User Manual
18
Procedures of CMOS clear:
a)
Turn off the system and unplug the power cord from the power outlet.
b)
To clear the CMOS settings, use the jumper cap to close pins 1 and 2 for
about 3 seconds then reinstall the jumper clip back to pins open.
c)
Power on the system again.
d)
When entering the POST screen, press the <ESC> or <DEL> key to enter
CMOS Setup Utility to load optimal defaults.
e)
After the above operations, save changes and exit BIOS Setup.
9. BAT2:
(2.0mm Pitch 1x10 Wafer Pin Header), Smart battery Interface.
Pin#
Signal Name
Pin1
VCC_BAT1
Pin2
VCC_BAT1
Pin3
VCC_BAT1
Pin4
SMB_DAT_SW
Pin5
SMB_SCL_SW
Pin6
BAT1_TEMP
Pin7
Ground
Pin8
Ground
Pin9
Ground
Pin10
SET_BAT1_ON
Function
Specifications
Nominal voltage (3S1P)
11.1~12.6V
Charge voltage
12.6V
Charge current
0.5C
10. BAT_LED:
(2.0mm Pitch 1x4 Wafer Pin Header), The Charge status indicator for BAT2.
Pin1-Pin3: Charge LED status.
Pin2-Pin3: Discharge LED status.
Pin4-Pin3: EC LED status.
Pin#
Signal Name
Pin1
B
Содержание ACS-2320
Страница 10: ...ACS 2320 User Manual 9 1 3 Dimensions Figure 1 1 Dimensions of ACS 2320 ...
Страница 15: ...ACS 2320 User Manual 14 units mm Figure 2 1 Motherboard Dimensions ...
Страница 64: ...ACS 2320 User Manual 63 Step 4 Click Next to continue Step 5 Click Next to continue ...
Страница 67: ...ACS 2320 User Manual 66 Step 4 Click Next to continue Step 5 Click Install to begin the installation ...