8
9
10
11
20
Battery Status Icon:
Full
Drained
When the battery is at low power level, please charge it
immediately to ensure the device work normally
Charging:
Warnings for charging:
1. A new battery may be empty and not charged before you get the
device.
2. To achieve the best performance of the battery, it is better to charge
it up to 8 hours in the first three times, but not over 16 hours.
3. In normal charging with DC charger, please make sure to charge it
for 2 – 2.5 hours to get it fully charged.
A new battery will reach its best performance after a number
cycles of charging and discharging.
If the device is not used for long time, it is better to charge
it to full capacity every 2 or 3 months during storage.
If not using the device for a long time, it is wise to take out
the battery.
Charger Application:
DC Charger:
Take out the DC charger, plug it into the wall outlet with AC 220V(100V
~240V), then plug in the DC jack into the device DC-in jack.(see the
illustration below).
Car Lighter Charger:
Please insert the car charger into car cigarette lighter jack, then plug
into the USB jack(see the illustration below).
Inserting into car
cigarette lighter jack
USB jack
When you use car charger, please start car engine first, then
connect it to the device to avoid possible damage to the
device due to overloaded pulse current during ignition.
Please pull it out when you stop the engine, and plug it in
again after next ignition.
Power On the device
In power off status, slide the power switch to "ON" position to turn on
the device, then the OSD will be displayed on screen.
Battery
Power On/Off the device
Function & Operation
Sleeping & Power –off
In power-on mode, press the power button on the device for 3-5 seconds
then the sleeping mode or confirmation for power-off screen will display
as follows:
In this UI click the button
will be in sleeping mode, click the button
will power off ; click the button
to exit the UI and back to
normal operation.
Waking -up from the sleeping
When in sleeping mode, a short press on the power-on button of the
device will wake up the system.
When in sleeping mode, all the procedure in operation will
pause but will back to normal status after waking up.
The clevice will be power off in
s
In this interface, click the small icon to switch to the corresponding page.
Then, an animation is played circularly on the screen. Touch the screen
or the small icon on the bottom to enter the function, and click the arrow
on the right bottom to turn the page. There will be an animation effect
when turning the page.
In this interface, click the icons on the screen to enter the corresponding
functions; and click the arrow on the right bottom to turn the page. There
will be an animation effect when turning the page.
Two kind s of the me interf ac es are av ail ab le. To ch an ge the the me,
ch an ge it in the lan guag e se tup under the sy stem se tup .
Secondary UI (Green background)
System UI (Green background)
Language
Backlight
Power
Sound
Time
System
Co.adjust
Function Description