More
Security,
More
Convenience
www.apexis.com.cn
/
www.apexis.cc
Network Light:
The green LED will on when connect to the network, the yellow LED will blink when data
transferred
Audio Output:
The jack is used to plug external speaker
MIC
: The jack is used to plug external microphone
I/O PINS:
1 Output A 2 Output B 3 Alarm input 4 Input (GND)
SD Card/SIM Card Slot
: Backup position, not available for this MJPEG camera.
RESET BUTTON:
Press and hold the RESET BUTTON for 15 Seconds, then the IPCAM will be reset back to
the factory default Parameter. (Please keep the power on when do RESET)
1.3.3 Bottom View
Figure 1.3
Original Apexis IPCAM have some stickers at the bottom, such as MAC address sticker, QC sticker etc.
If your camera does not have these stickers, it may be a clone one, clone Apexis IPCAM could not use the
original firmware and obtain our good after sale service.
1.4 PC System Requirements
System configuration requirements :
( Example for viewing four IPCAM)
CPU:
2.06GHZ or above
Memory
: 256M or above
Network Card:
10M or above
Display Card
: 64M or above memory
Recommendable Operating system:
Windows 2000/ XP/ Vista/ 7
1.5 Hardware Instruction
Follow the steps below to set up your camera hardware. Make sure to follow each step carefully to ensure that
the camera operates properly
Shenzhen Apexis Electronic Co., Ltd
Tel: +86-755-26509025 Fax: +86-755-26509229
5
