manualshive.com logo in svg

Apex Pro 70751, Руководство оператора, Страница: 5 / 21

Поделиться
Скачать
Apex Pro 70751 Скачать руководство пользователя страница 5

5 

 

4.

 

Power tool use and care 

a.

 

Do not force the power tool. Use the correct power tool for your application. The correct power tool will 
do the job better and safer at the rate for which it was designed. 

b.

 

Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be 
controlled with the switch is dangerous and must be repaired. 

c.

 

Disconnect the plug from the power source and from the power tool before making any adjustments, 
changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting 
the power tool accidentally. 

d.

 

Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power 
tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained 
users. 

e.

 

Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any 
other condition that may affect the power tool’s operation. If damaged, have the power tool repaired 
before use. Many accidents are caused by poorly maintained power tools. 

f.

 

Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less 
likely to bind and are easier to control. 

g.

 

Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into 
account the working conditions and the work to be performed. Use of the power tool for operations 
different from those intended could result in a hazardous situation. 

h.

 

This appliance is not intended for use by persons (including children) with reduced physical, sensory or 
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or 
instruction concerning use of the appliance by a person responsible for their safety. 

i.

 

Children should be supervised to ensure that they do not play with the appliance. 

5.

 

Service 

Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure 
that the safety of the power tool is maintained. 

Safety rules for laser lights 

WARNING:

 Do not stare directly at the laser beam. 

WARNING:

 It may be more difficult to see the laser line in conditions of bright sunshine and on certain 

surfaces. 

A hazard may exist if you deliberately stare into the beam, please observe all safety rules as follows: 

 

The laser shall be used and maintained in accordance with the manufacturer’s instructions. 

 

Never aim the beam at any person or an object other than the workpiece. 

 

The laser beam shall not be deliberately aimed at personnel and shall be prevented from being directed 
towards the eye of a person for longer than 0.25s. 

 

Always ensure the laser beam is aimed at a sturdy workpiece without reflective surfaces. i.e. wood or rough 
coated surfaces are acceptable. Bright shiny reflective sheet steel or the like is not suitable for laser use as the 
reflective surface could direct the beam back at the operator. 

 

Do not change the laser light assembly with a different type. Repairs must be carried out by the laser 
manufacturer or an authorized agent. 

CAUTION:

 Use of controls or adjustments or performance of procedures other than those specified herein may 

result in hazardous radiation exposure. 
 

 

Содержание 70751






















Отзывы:

Нет отзывов