Apex Digital Smart Plug, Руководство пользователя, Страница: 2 / 20

2 APEX | Smart Plug
1 INTRODUCTION
This Smart Plug is part of the Apex product
family and is Zigbee 3.0 certified.
For latest and additional
documentation, please visit:
https://dsh.datek.no/SmartPlug/
2 IMPORTANT SAFETY INFORMATION
Read this manual before attempting to
install the device!
• The Smart Plug is for indoor use only.
• Do not use the Smart Plug in areas where it
may be exposed to water or high humidity.
• Do not connect Smart Plugs after each other
in sequence.
• Do not connect any device consuming more
than 16A.
• This is not a toy and not intended for use
by children.
3 GETTING STARTED
- The startup is indicated with the LEDs
blinking alternately red and blue.
- After startup, the Smart Plug will search for
a joinable network. While scanning the red
LED will blink rapidly 3 times.
4 FACTORY RESET
- Press the
push-button for
at least 12 sec.
to factory reset
the Smart Plug
and start pairing
mode.
EN