EK16
EK16U
3
FIGURE 3.
Figure 3 shows a suggested simple test circuit that you
can build to gain a familiarity with the evaluation kit as
well as the amplifier. At the output (pin 6) you should
observe a 100 V p-p sine wave.
*
COMPONENTS SUPPLIED WITH EVALUATION KIT.
COMPONENTS SUPPLIED WITH EVALUATION KIT.
FIGURE 2.
Figure 2 shows the schematic of the evaluation kit's pre-
wired connections. Components supplied with the kit are
marked with an asterisk (*). All other connections are
made via the bread-boarding areas of the circuit board.
