Instruction Manual
Manual
Symptoms
No power
No picture
No sound
No TV signal
Stripe or purple interference
appears in the screen
Picture becomes snowy.
Picture with multi-image
TV channel not received
Black box appears on screen.
Remote control doesn't
operate.
Brightness is unstable or
noises are produced on
playback pictures
The DVD video player doesn't
start playback
MP3 won't read disc or it skips
TROUBLESHOOTING GUIDE
Check the following guide for a possible correction to a problem before contacting customer service.
Check FAQ at our website: www.apexdigitalinc.com
Correction
•
Connect the power plug into the wall outlet securely.
•
Verify the connection from the VCR video output to the TV video input is secure.
Then switch TVto the appropriate Video mode.
•
Verify coaxial cable from antenna is connected to RF IN.
•
Connect the audio cables into the terminals securely.
•
Verify the connection from the VCR audio output to the TV audio input. Then
switch to the appropriate mode on the receiver. Refer to your audio amplifier
wner's manual.
•
Verify the volume is at an appropriate level and the mute feature is not on.
•
Verify the TV is set to Antenna mode.
•
Make sure the antenna is securely connected to the RF in jack.
Unplug the TV from the wall for 30 seconds, then plug in and try again.
Unplug the antenna connection from the back of the TV, unplug the TV from the
wall, wait for 30 seconds, then try again.
•
Verify the speakers around the TV set are shielded.
•
Verify the antenna lead wire is in working condition.
•
Verify the antenna is connected securely to the RF in jack.
•
Move the antenna around to minimize multi-images.
•
Make sure the Air/Cable setting is correct.
•
Channel may be locked with block channel feature, such as Parental Control.
•
Check Add/Erase feature, as channel may be have been erased during set up.
•
Verify Closed Caption feature is off.
•
Batteries may be weak. Replace batteries.
•
Make sure nothing is in between the remote and the remote sensor.
•
What you're viewing may be effect of the copy protection circuitry required on all
DVD players.Change another disc, and try again.
•
Place the disc with the graphics side up.
•
Place the disc on the disc tray correctly inside the guide.
•
Make sure the disc is free from scratches & fingerprints.
•
Press the SETUP button to turn off the menu screen.
•
Cancel the parental lock function or change the parental lock level. (The preset
password is 1225.)
•
Turn the power off then disconnect the power plug and reinsert it back into the
wall. again.
•
Use region 1 disc only.
•
Reburn disc as the software edition used may not be compatible with the player.
Check web site for instruction.
•
Use new editions of software such as Voyetra Audiostation 4, Adaptec's "Easy
CD Creator" or NT Roxio's Toast Titanium, etc.
•
Make sure MP3 file are not encoded with a variable bit rate such as provided by
Real Networks.
23
Содержание GT1417DV
Страница 25: ...APEX Digital Inc Ontario CA 91761 FOR SERVICE CALL 866 4 APEX INC http www apexdigitalinc com...
Страница 26: ......