13
Instruction Manual
Programming the Remote Control
FUNCTIONS & FEATURES (continued)
1.
Set the
TV, DVD/VCR,SAT/CAB, AUX
switch to the device you want to control.
2.To program the remote control
1)Press and hold the SET key for over 3 seconds until the LED indicator on the remote control turns off.
Release the key and the LED will light again. The remote control is now in the PROGRAMMING mode.
2)Use the 0-9 keys to enter three-digit code number for your device. If the right code number was entered,
the LED blinks three times. If you enter a code not listed below, or you press any other keys than
STANDBY and ENTER, the LED turns off.
3)"
TV
": To control TV. "
DVD/VCR
": To control DVD, VCR, LD and CD. "
SAT/CAB
": To control satellite
receiver and cable box. "
AUX
": To control all the above appliances.
3.To search codes
1)Press and hold the SET key for over 3 seconds until the LED indicator on the remote control turns off.
Release the key and the LED will light again. The remote control is now in the PROGRAMMING mode.
2)Press the STANDBY key and code search begins.
3)
4)When the
TV, DVD/VCR, SAT/CAB, AUX
switch is set to the "AUX" position, the remote control can not
search code.
4.To check the current code number
1)Press and hold the SET key for over 3 seconds until the LED indicator on the remote control turns off.
Release the key and the LED will light again. The remote control is now in the PROGRAMMING mode.
2)Press the ENTER key.
3)You may read the code number according to the LED display status as follows.
5.To use the REC key
The REC key functions only when it is pressed twice continuously.
Press
Description
up or down
arrow key
The remote control searches codes upwards or downwards. Each time you press the up or
down arrow key, the code number for the STANDBY key increases or decreases by 1; or the
code number automatically increases or decreases by 1 per 3 seconds. Try each code
separately until you find the one that works. If not after trying all the codes, LED blinks rapidly
eight times and search stops.
ENTER
If the desired code number is found, press the ENTER key to confirm the current searched
code number for your device. Then LED blinks rapidly three times to exit from search.
Other keys
LED blinks rapidly eight times and search stops.
Code Number
LED Display Status
First-digit
Second-digit Third-digit First-digit
Second-digit
Third-digit
0
0
0
Blinks rapidly once Blinks rapidly once Blinks rapidly once
1
0
6
Blinks once
Blinks rapidly once Blinks six times
0
4
3
Blinks rapidly once Blinks four times
Blinks three times
1
5
0
Blinks once
Blinks five times
Blinks rapidly once
