1.4 Install I/O panel that
comes with M/B.
Most motherboards
come with its own
I/O panel. If your
M/B does not come
with it, then it is
likely that you can
use the one that
already in the case.
1.6 Place your M/B on the
standoffs, then tighten
up.
1.7 Remove the 5.25 bay
covers. Insert your
index finger on the
side, push hard to the
left and pull out as
shown on the picture.
"
1.8 Break the metal plate
behind the drive bay
cover and remove it.
1.9 In the screw box you
will find bags of screws
for DVD, M/B, HDD,
2 sets of keys and 4
drive rails. The other
4 are mounted on the
bottom of the case.
