Apera Instruments DO8500, Инструкция по эксплуатации

Страница: 18 / 24

- 18 -
stored in the meter as shown in Figure – 15.
②
— Mode and Serial Number
③
— Parameter setting information
④
— Port type and press key
The port number shows where the software is connected to the computer, each computer
recognizes a different port number, as shown in Figure – 15, the port number is
COM3 .
Open/Close — press this key to turn on or off software, Icon indicates that software is
activated.
Refresh — press this key to reset COM port
SyncTime — press this key to sync time with computer.
Download — press this key to download the data from the meter to the computer,
Clear — press this key to clear all the stored values.
Export — press this key to export the stored value to a Microsoft Excel file.
Exit — press this key, PC-Link program exits from the computer interface.
9.2. Run software
Load PC-Link to the computer, open “PC-Link” file, which includes PCLink software file and
driver Compressor file. Generally, users can open PCLlink file directly. If the meter can`t
be connected to software, please install the USB driver program.
Note: for 32bit OS please install "McphCdcDriverInstallationTool" file in /x86;
for 64bit OS please install "McphCdcDriverInstallationTool" file in /x64.
Fig.-15