8.
Parameter Setting
8.1 Setting chart
8.2 Parameter setting instruction
When turned off, long press to enter parameter setting mode; Press to switch from P1-
P2-
…P6. Press , the parameter flashes; Press to choose parameter Press to confirm;
Long press to power off.
A)
High-Low Measurement Heads-Up Examples (P1 and P2)
Heads-Up when measured value
≤120 mV:
Preset low value = 120 mV, highest value = 1000 mV, when measured value
≤ 120 mV (stable
icon
displays on LCD); Red back-lit heads-up displays.
Heads-Up when measured value
≥ 150 mV:
Preset high value = 150 mV, lowest value = -1000 mV, when measured value
≥ 150 mV (stable
icon
displays on LCD); Red back-lit heads-up displays.
Heads-Up when measured value in range of 120 mV and 150 mV:
Preset low value = 120 mV, highest value = 150 mV,
when the measured value <120mV or
>150mV
(stable icon
displays on LCD); Red back-lit heads-up displays.
B)
Automatic lock (P3):
Select “On” to activate auto lock function. When reading is stable for more than 10 seconds, the
tester will lock the value automatically, and HOLD icon will display on LCD. Press
key to
cancel auto hold.
C)
Backlight (P4)
“Off”-turn off backlight, “On”-turn on backlight, “1”- backlight will last for 1 minute.
D)
Temperature Unit (P5)
Select C˚ or F˚, the factory default is ˚C.
E)
Factory default setting (P6)
Symbol
Parameter Setting Contents
Code
Factory Default
P1
Low value measurement alarm
-1000 to 1000
mV
-1000
P2
High value measurement alarm
-1000 to 1000
mV
1000
P3
Select automatic lock
Off
– On
Off
P4
Select backlight
Off - 1
- On
1 (1 min auto off)
P5
Select temperature unit
˚C - ˚F
˚C
P6
Restore to Factory Default
No
– Yes
No
