Apelson UBINDJV60B, Руководство пользователя

Страница: 27 / 36

Appendix...
GB IE
Installation
Electrical connection
Caution
> This hob must be connected to the mains power supply only by a
suitably qualified person.
> Before connecting the hob to the mains power supply, check that:
1. the domestic wiring system is suitable for the power drawn by
the hob.
2. the voltage corresponds to the value given in the rating plate
3. the power supply cable sections can withstand the load specified
on the rating plate.
> To connect the hob to the mains power supply, do not use adapters,
reducers, or branching devices, as they can cause overheating and
fire.
> The power supply cable must not touch any hot parts and must be
positioned so that its temperature will not exceed 75˚C at any point.
Check with an electrician whether the domestic wiring system is suitable
without alterations. Any alterations must only be made by a qualified electrician.
> If the cable is damaged or to be replaced, the operation must be carried out
the by after-sale agent with dedicated tools to avoid any accidents.
> If the appliance is being connected directly to the mains an omnipolar circuit-
breaker must be installed with a minimum opening of 3mm between contacts.
> The installer must ensure that the correct electrical connection has been
made and that it is compliant with safety regulations.
> The cable must not be bent or compressed.
> The cable must be checked regularly and replaced by authorised technicians
only.
2 7