22
Connecting the hob to the mains power supply
This hob must be connected to the mains power supply only by a suitably qualified person.
Before connecting the hob to the mains power supply, check that:
1. the domestic wiring system is suitable for the power drawn by the hob.
2. the voltage corresponds to the value given in the rating plate
3. the power supply cable sections can withstand the load specified on the rating plate.
To connect the hob to the mains power supply, do not use adapters, reducers, or branching
devices, as they can cause overheating and fire.
The power supply cable must not touch any hot parts and must be positioned so that its
temperature will not exceed 75˚C at any point.
Check with an electrician whether the domestic wiring system is suitable without
alterations.Any alterations must only be made by a qualified electrician.
Cautions
1.
The induction hotplate must be installed by qualified
personnel or
technicians.
We have professionals at your
service. Please never conduct the
operation by
yourself.
2.
The hob will not be installed directly above a
dishwasher, fridge, freezer,
washing machine or clothes
dryer, as the humidity may damage the hob
electronics
.
3.
The induction hotplate shall be installed such that
better heat radiation can
be ensured to enhance its
reliability.
4.
The wall
and induced heating zone above the table
surface shall
withstand
heat.
5.
To avoid any damage, the sandwich layer and adhesive
must be resistant to
heat.
