Apelson UBINDB60F, Руководство пользователя

Страница: 17 / 24

17
A(mm) B(mm) C(mm) D E
760 50 mini 20 mini Air intake Air exit 5mm
Before locating the fixing brackets
The unit should be placed on a stable, smooth surface (use the packaging). Do
not apply force onto the controls protruding from the hob.
Before you install the hob, make sure that

The work surface is square and level, and no structural members interfere
with space requirements
.

The work surface is made of a heat-resistant material .

If the hob is installed above an oven, the oven has a built-in cooling fan .

The installation will comply with all clearance requirements and applicable
standards and regulations
.

A suitable isolating switch providing full disconnection from the mains power
supply is incorporated in
the permanent wiring, mounted and positioned to
comply with the local wiring rules and regulations.

The isolating switch must be of an approved type and provide a 3 mm air gap
contact separation
in all poles (or in all active [phase] conductors if the local
wiring rules allow for this variation of the requirements) .

The isolating switch will be easily accessible to the customer with the hob
installed
.

You consult local building authorities and by-laws if in doubt regarding
installation
.

You use heat-resistant and easy-to-clean finishes (such as ceramic tiles) for
the wall surface
surrounding the hob.
When you have installed the hob, make sure that

The power supply cable is not accessible through cupboard doors or drawers .

There is adequate flow of fresh air from outside the cabinetry to the base of
the hob
.

If the hob is installed above a drawer or cupboard space, a thermal
protection barrier is installed below
the base of the hob .

The isolating switch is easily accessible by the customer .