Apelson ICONFECO60, Руководство пользователя, Страница: 9 / 24

9
Using your Induction
select key by pressing “ ” key.
•You have not placed a pan on the correct cooking zone or,
•The pan you’re using is not suitable for induction cooking or,
•The pan is too small or not properly centred on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
The display will automatically turn off after 1 minutes if no suitable pan is
placed on it.
alternately with the heat If the display flashes
setting
This means that:
Hob
To start cooking
1. Touch the ON/OFF key
（
A
）
for 3 seconds.
After power on, the buzzer beeps once, all displays
show “ – “, indicating that the induction
hob has entered the state of standby mode.
2. Place a suitable pan on the cooking zone that
you wish to use.
• Make sure the bottom of the pan and
Of the cooking zone are clean and dry.
the surface
3. According to the heating zone where the pan is placed, select a relevant zone
4. Adjust heat setting by touching the slider regulating key(D) control.
• If you don’t choose a heat setting within 1 minute, the induction hob will
automatically switch off. You will need to start again at step 1.
• You can modify the heat setting at any time during cooking.