Apelson AWD14SS, Руководство пользователя

Страница: 9 / 16

9
INSTALLATION
AWD14SS
Only a qualified person in compliance with the instructions
provided must install the appliance. The manufacturer
declines all responsibility for improper installation, which
may harm persons and animals and damage property.
CAUTION
The power supply to the appliance must be switched
off before any adjustments or maintenance work is
undertaken.
POSSIBLE INSTALLATION EXAMPLES
POSITIONING THE APPLIANCE IN THE
HOUSING UNIT
Push the appliance into the housing unit as far as the
vapour strip and align it
Open the drawer, and use the 2 screws and plastic
supports supplied to secure the appliance to the side walls
of the housing unit.
The appliance is supplied with three metal trims which
have an adhesive underside. These trims must be stuck
on to the drawer so that they seal any gaps between the
housing unit and the drawer.
Carefully pull the protective foil off the underside of each
trim.
Then position the side trims x2 so that they are flush with
the side walls of the housing unit and If the unit does not
have a back wall you do not need the third trim. If the unit
has a back, position the back trim x1, so that it is flush
with the back wall of the
≥555mm
560-
568mm
7mm
6mm
1mm4
1
548mm
537mm
12
8mm
23mm
595mm
715-72
0mm