Apelson AH60AURC, Руководство пользователя

Страница: 18 / 24

- If the motor is already on speed 1-2 , each press of this icon will increase the fan speed accordingly.
- If you press and hold the icon for two seconds, the fan speed will increase to full power and 3 will
display.
Timer
- When the fan motor is on and the Timer icon is pressed, i t will be red and the current speed in the
display will start to
fl
ash.
- The chosen speed level will remain in use for fi ve minutes before dropping down to the next lowest
speed. This speed will remain in operation for two minutes before dropping down again. This will be
repeated every two minutes unless the speed is already at level 1 and then the fan will turn off. If
the light is already on, this will also be turned off.
- Pressing the Speed Reduction icon or Speed Increase icon during a current timer program will
restart the countdown process again with a fi ve minute cycle.
- If the Timer icon is pressed again during a current timer program, the cycle will be cancelled, the
icon will revert to white and the current fan speed will remain on inde fi nitely.
- The maximum timer program cycle is 9 minutes: 5 minutes on 3 and then 2 minutes each on speed
2 down to speed 1.
02 General Use
-
Light On/Off
-
-
Use this control to switch the light on independently of the fan motor and the icon will be red.
When the fan is in use, and the light is off, the icon will be white but will turn red if the light is then
switched on.
-
Fan On/Off and Speed Reduction
-
-
-
Press this icon once to turn on the fan motor at speed 1. All icons will be white and the light icon will
be red if already in use.
If the motor is on speed 1, pressing and holding this icon for two seconds will turn off the fan motor.
As above, the light control is independent of this operation.
If the motor is higher than speed 1, this will reduce the fan speed with each press of the icon.
LED Display
Displays the extraction mode during Set Up or the motor speed from 1-3.
Speed Increase
Press this icon once to turn on the fan motor at full power, and 3 will display.
18