Apeks wtx series Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 35

Apeks wtx series Скачать руководство пользователя страница 15

WTX Series Owner’s Manual

3

Each bladder cell has an additional threaded manifold. While

it comes capped off from the factory, it gives the diver the

option of adding a second pull dump. A dump valve kit is p/n

4754. The additional manifold for the front bladder is on the

right front side and the additional manifold for the rear blad-

der is on the left rear side.

The outer bag of the twin cylinder buoyancy cell is made

from 000 denier ArmorShield™ Cordura. This fade-resistant

material was chosen for its extreme durability.

The inner bladder of the buoyancy cell is made from a strong,

coated fabric. This material meets all necessary military

specifications and can be found on lifesaving flotation equip-

ment worn by military pilots.

The inner bladder of the buoyancy cell is protected from

getting caught in the outer zipper by using a barrier of V-Dia-

mond™ rubber.

The left side inflator is for the front bladder and the right side

inflator is for the rear bladder.

The Apeks technical airway found on each cell includes a

corrugated hose that has an elliptical cross section. This

allows for a lower profile, which reduces drag and lays clean-

ly over the shoulder.

A safety cable can be found in the corrugated hose of each

Apeks technical airway. This safety cable protects the cor-

rugated hose from hyperextension and tearing that can be

caused by any undue stresses such as snags.

Technical diving equipment must be robust and reliable.

Apeks’ new technical inflator exceeds the challenge. The

secret to its reliability is its simplicity. Fewer parts mean less

to go wrong and ease of service. Once you hold the precision

marine brass buttons in your hand, you will quickly realize

that this is not a recreational inflator, but rather a serious tool

to meet the dive at hand.

Optional Lower Pull Dump

Outer Bag made of 1000D ArmorShield™ Cordura

Rugged Inner-Bag made of Mil-Spec Material

Inner-Bag Protected from Zipper with V-Diamond™ Rubber

Dedicated Inflator for each Bladder

Elliptical Corrugated Hose

Safety Cable in the Airway

Heavy Duty Inflator with Brass Buttons

«
...
13
14
15
16
17
...
»

Содержание wtx series




































Отзывы:

Нет отзывов