manualshive.com logo in svg

Apeks QuantumX, Руководство пользователя, Страница: 41 / 60

Поделиться
Скачать
Apeks QuantumX Скачать руководство пользователя страница 41

41

QuantumX Owner's Manual

Decompression Dive Mode

If you exceed the no-decompression time limit, you 
will be required to make mandatory decompres-
sion stops. The computer will automatically switch 
from normal Dive Mode to Decompression Dive 
Mode. In Decompression Dive Mode, the Quan-
tumX displays the following information:

a. 

Decompression warning: 

When

 

the computer 

enters Decompression Dive Mode, The com-
puter will flash the words DECO STOP in the 
dot matrix display for 15 seconds.

b.

 

DECO label:

 Displayed above the current depth to alert you that you are in 

Decompression Mode.

c. 

Stop depth:

 This is the shallowest depth to which you can ascend. DO NOT 

ascend above this depth until the computer displays the next shallower decom-
pression stop, or the computer returns to No-Decompression Dive Mode.

d. 

Stop time:

 This is the amount of time you need to spend at the decompression 

stop.

e. 

Total ascent time:

 This is the total amount of time required at all the decom-

pression stops, plus the time it takes to ascend to all the stops.

Decompression Dive Mode

a

c

e

b

d

Содержание QuantumX





























































Отзывы:

Нет отзывов