Apcon ACI-3144-XR, Руководство пользователя, Страница: 42 / 90

APCON, Inc. 42 A54-3144-XR • Rev B
Chapter 5. Configure the chassis ACI-3144-XR Chassis User Manual
Status Menu
To access the Status Menu , press DOWN to scroll through the sub-menus on the
Main Menu until the Status menu option is selected, then press ENTER .
The Status Menu lists the following sub-menus:
Details about these options are provided in the sections that follow.
Status > System Status
The Switch Status screen displays the status of components installed in the chassis. The
number of blades and transceivers installed may vary.
To access the Switch Status screen, press DOWN to scroll through the sub-menus on the
Main Menu until the System Status menu option is selected, then press ENTER . The
following screen is displayed:
The status information displayed varies by the number of and type of blades and power
supplies installed in the chassis. In the example shown here, the ACI-3072-XR contains a
maximum of two power supplies.
Status Sub-menu Description
System Status (see
page 42
)
Displays operational details about the switch,
including alarm status.
Failover Status (see
page 43
)
Provides a status for failover.
Online Users (see
page 44
)
Displays log-in information, including the number
of log-in attempts and currently logged-in users
Component/Status Description
Power n (Supply) Indicates operational status of the specified power
supply, where
n
is a value from 1 to 4.
Good (
green
)
The power supply is functioning normally.
FAIL (
red
)
The power supply failed.
Generates an audible alarm, if enabled.