APART ZONE4, Инструкция по эксплуатации

Страница: 6 / 20

4
Pre-Amplifiers
Introduction
Zone 4 professional preamp has 4 stereo line source inputs on RCA
connectors plus 3 mono mic/line balanced inputs on euroblocks. All
mic inputs feature individual sensitivity, level and tone control. Mic
2 and 3 inputs have switchable phantom power. Each mic signal
can be assigned to any of the 4 available zone outputs.Microphone
input 1 controls and connectors are available at the rear of the
unit, featuring a balanced mic input with priority switch and zone
assign preset dipswitches. If you need more flexibility and ease
of installation, simply connect our Apart selective paging station
MICPAT-4 instead, it will override the mic 1 zone assignments. Mic
2 and 3 inputs can be controlled and assigned via the front panel
controls. In order to avoid any abuse by the end user, you can hide
the microphone controls with the supplied cover plate.
Zone 1 to 4 stereo outputs can be individually configured as mono
or stereo outputs and are available on RCA connectors. Every zone
has its own line input selector, bass and treble tone control and
music level control. Every zone also has its own microphone mix
level control. Music and mic mix can be muted/unmuted manually
per zone by simply pushing the level knob.
System integrators will be pleased to find a RS232 port at the back,
allowing full control of the most important system parameters.
If you need to control the zones locally, you can always add a wired
remote, Apart model ZONE4R to any zone. Wiring is simple, using
standard RJ45 connectors and CAT5 cable.
Finally there is the IR input port. This port can be used to connect
our optional PIR-REC infrared receiver. There is no infrared remote
control available for the ZONE4 unit. We have added the infrared
codes for those who want to program their universal infrared
control unit.