APART PR4000R, Инструкция по эксплуатации, Страница: 7 / 16

Instruction manual PR4000R
5
Front panel
3
2
7
6
5
4
9
8
10
18
19
22
23
26
27 28
12
14
16
11
13
15
20
21
24
25
17
1. Power knob / power led: lip the switch to turn the unit on and
off. In standby mode, the power led lights up slightly dimmed.
In the off position the unit is fully turned off.
2. Tuner select button: push this button, and immediately
afterward push button ‘18’, ‘20’, ‘22’ or ‘24’ (labeled T1 – T4)
to select tuner 1, 2 ,3 or 4. Led’s ‘13’, ‘14’, ‘15’ or ‘16’ will light
up to indicate the selected tuner to be edited (T1 – T4).
3. Scan: push this button to automatically scan the stored preset
radio stations, with every push on the scan button, you will
jump to the next preset. When you keep the button pushed for
a few seconds, M-SCAN appears in the display and the tuner
will automatically scan all presets once.
4. Mono / stereo selector: use this switch to activate stereo or
mono mode. In case of weak reception, mono mode will
drastically reduce noise. In case of stereo reception, the stereo
led ‘12’ will light up.
5. Save button: push this button to save the currently selected
radio station, push a numeric button (or button combination,
see below) afterwards and conirm your selection by pressing
the save button a second time.
1