
10
MEDIA PLAYER
*Please note: the unit may respond slowly when you change the
input source. This depends on the memory capacity and reading
speed of the memory stick/card and the number of files present on
the media. When inserting a CD, the unit will first read the table of
content to determine the type of media present on the disc. This
may take a few seconds. During this time, the unit will not respond
to any command.
The unit will automatically recognize the serial commands for CD/
USB/SD and tuner part. When the tuner or the CD/USB/SD is in
standby mode, sending a command will cause no reply from the
unit or action taken by the unit. This is valid for all commands
except for the CD ON and DAB ON commands. Note: the output
level can also be adjusted during playback via the infrared remote
or serial control commands. The output level controls (2,6) are
located on the rear panel of the unit. After waking up from standby
or after power up, the volume level is automatically reset to the
maximum as set by the rear volume knob.
Important notice: always allow the unit to acclimatize during at
least one hour. E.g when the unit has been transported in cold
weather conditions, the electronics and optical devices inside the
unit might condensate, causing malfunction or even permanent
damage to the unit!
Содержание PCR3000RMKIII
