
MIX-BUTTONS
4 X 60 WATT POWER AMPLIFIER
ALSO AVAILABLE FROM APART
4 X 60 WATT POWER AMPLIFIER
•PA2120MKII : 2 X 120 Watt stereo power amplifier..
•BUZZ-STOP II : to avoid ground loops.
SLIMLINE
SLIMLINE
SLIMLINE
SLIMLINE
Cooling & Protection systems
This power amplifier is designed for dynamic high quality sound reproduction. Due to its low impedance driving
performance, and in combination with 16 ohm loudspeakers, it is the ideal solution for well-dispersed 'background-sound'
systems (many speakers at moderate sound level). This power amplifier is not designed for continuous high power
applications.
Keep the amplifier in a cool 'free-air' environment, especially the side heatsinks. When the amplifier is driven into too high
levels, then the 'overtemperature' protection may be activated. The 'protect' led will go from green into red. It will reset
automatically if the temperature is safe again.
If you don't lower the levels and just keep on driving into high levels, then the temperature protection of the transformer
may be activated. Then all LED's go out, and you have to wait 5-10 minutes before it will be rest automatically.
It is very important to set the impedance switch at the rear panel according the connected speaker-impedance.
•PM7400MKII : Stereo pre-amplifier mixer.
•PIR7600I : Remote controlled stereo pre-amplifier..
•PXQ2215 : Professional stereo equalizer - cross over
MIX button
The three MIX-buttons can be used to link the input audio signal
to the amplifier next to that input.
INPUT1
INPUT2
INPUT3
INPUT4
MIX1-2
MIX2-3
MIX3-4
1
2
3
4
HEATSINK