APART MASK series, Руководство пользователя

Страница: 4 / 7

MASK SERIES
WWW.APART-AUDIO.COM
6
Important Safety Instructions
Before pushing your loudspeaker volumes to the edge, take a few minutes to read
these instructions carefully. This little time might avoid claims afterwards.
1. Keep this manual for future reference.
2. Clean only with dry cloth.
3. Do not operate near heaters or place it on other apparatus which produce a lot of heat.
4. Take care for the speaker leads. Never use damaged leads and install them in
such a way that no one can walk on it.
5. Only use accessories specifi ed by the manufacturer.
6. Make sure the mounting surface can easily support the speaker’s weight.
7. Use only industry-accepted rigging tools and methods.
8. Choose the right speaker for the right job.
9. Use suffi cient loudspeakers and avoid death spots.
10. No main power shall be connected to the loudspeakers.
11. This apparatus should only be serviced by qualifi ed personnel.
If not, the warranty might be void.
12. Removal of the grill causes risk to loudspeaker damage.
13. Use cables of the right gauge, certainly for long runs.
14. Use cables with clear colour codes and maintain polarity throughout the whole system.
15. Switch amplifi ers on with the volumes turned completely down to avoid loud clicks and clacks.
16. Avoid loud feedback for this is a main speaker killer!
17. Please check the units’ condition after unpacking. If the outside of the carton
box has been damaged, inform your shipper immediately.
Safety information
Overload Protection
All MASK models have a unique overload protection, which only comes into the signal
path when needed. When too much power is fed into your MASK, fi rst a red led will
blink. When you neglect this warning, the overload protection will disconnect the signal
going to the loudspeakers and the red led will remain on. Turn down the level and after
about 5 seconds cooling down your favourite music will be heard again. When you
don’t want to work on your client’s nerves, don’t activate the overload protection !
Protection LED
Apart thanks you for purchasing the MASK 8.
Read this manual carefully to get the best result out of your music system.
MASK two way loudspeakers have been designed to fi t in any interior and to be applicable in
most situations.
The MASK supports shipped along, are a great tool for easy reliable installation and orientation.
Each model has a unique protection circuit, which will only appear in the audio path when
needed.
We’re sure your MASK 8 loudspeakers will give the fi nishing touch to your sound system.
• MDF wooden cabinet
• Available in black or white
• Paintable
• 2 L-brackets for safe and reliable mounting
• Wall and ceiling mountable
• 8 rigging points, M8
• Unique overload protection
• Protective steel grill
• Dome tweeter on 360° Waveguide horn for broad dispersion
• 8 Ω, 8” coated paper cone HD woofer
• Two speakon 4 connectors
• Great power handling
• Smooth professional HiFi sound
Features
APART THANKS YOU
2