15
Input impedance / sensitivity unbalanced
(RCA) / 4 ohm
10 Kohm / 1 V 0dBV
Input impedance / sensitivity balanced (XLR)
/ 4 ohm
20 Kohm / 1 V 0 dBV
Frequency response (0, -0.5 dB)
10 Hz – 50 kHz
THD
< 0.05 %
IMD
< 0.06 %
Noise
>100 DBA
Gain
30 dB (36 dB bridged)
Damping factor
> 200
Dynamics and level control
APC, switchable for 2-3 or 4-8 ohms
Power amp circuit design
High current, high voltage class G
Efficiency (dynamic program of 10 dB, 1 V
input)
70 %
Protection circuits
DC, HF, clip, overcurrent, short-circuit
Temperature protection
95°C/ch + transformer 105°C
Cooling
convectional, no fan
Power consumption
15VA idle, 600VA full program, 1KVA peak
Mains power requirements
230VAC, 50Hz
General technical specifications
Physical specifications
Net dimensions (cm) (W x H x D)
48.3 X 4.4 X 36
Gross dimensions (cm) (W x H x D)
56 x 10 x 55
Net weight
7.5 kg
Gross weight
9.0 kg
APart-Audio general warranty conditions:
APart-Audio warrants this product to be free of defects in material and workmanship for a period of one* year for parts and for a
period of one* year for labor from the date of original end-user purchase. This warranty is valid only for the original end-user and
cannot be transferred.
During the warranty period APart-Audio orone of its authorized service partners shall either repair or replace any product, free of
charge, that proves to be defective on inspection by APart-Audio or its authorized service representative.
