1) Mains inlet: insert the supplied mais cord in this slot.
2) Fuse holder: contains a 630 mA slow blow fuse, replace only with the same type of fuse.
3) Ground lift switch: activating ground lift may solve some ground loop problems (excessive hum)
4) FM stereo/mono switch.
5) Combi output: on this output you will hear the CD until it is finished.
It will automatically switch to tuner playback afterwards.
6) CD/USB level: volume controller of CD/USB individual output and combi output.
7) CD/USB output: this output will only play the CD or USB drive.
8) Tuner output: this output will only play tuner output.
9) Tuner level: volume controller of tuner individual and combi output.
10) FM antenna connector: connect the FM antenna here.
11) Rear USB connector: this is a copy of the front USB connector.
If you use both, the port that was in use first will be active.
WARNING: BE AWARE OF POSSIBLE HIGH VOLTAGES BETWEEN THE EARTH OF YOUR AC-
TIVE RADIO NETWORK/ANTENNA CABLE AND THE GROUND OF YOUR AUDIO SYSTEM. IN
CASE OF DOUBT, USE A HF GROUND ISOLATOR.
Remark: in case you don’t want to hear FM radio when CD/USB playback has finished, turn down
the tuner level at the rear panel.
8
9
7
5
6
4
3
2
1
10
11
Back panel
Содержание BGM3000
Страница 1: ...INFO APART AUDIO COM MANUAL BGM3000...
