APART AUDIOSYSTEM8.8, Инструкция по эксплуатации

Страница: 6 / 20

6
Matrix systems
CAUTION: a clipped or distorted audio signal at the input (overload)
will come out as a clipped or distorted signal at the output,
regardless of the output level and DSP processing power applied
to the signal. Clipping occurs when the signal and/or the applied
gain is too high, due to incompatibility of the signal level, a faulty
source, an impedance mismatch or a human error. Therefore,
monitor incoming signals and do not overload the inputs. Adjust
the output level(s) and gain settings of your source(s) if necessary.
Due to the internal gain structure of the AUDIOSYSTEM, the output
signals may clip even when the input signals are relatively low. Do
not over amplify audio signals. Boosting certain frequency bands or
over compressing incoming audio signals may cause signal clipping,
distortion and excessive noise at the output. If you have to add lots
of gain, your incoming signal may be too weak.
NOTE: This is the out-of-the-box manual of your AUDIOSYSTEM8.8.
A full manual and GUI guide can be found on our website. If you
want customized configurations, adjustments and a total solution
for your specific application, please seek the online manual.
The apart-team hopes you enjoy our product. We enjoyed
developing this product and guarantee it will serve as a solution for
every kind of implementation.
C A U T I O N
TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER OR BACK
NO USER-SERVICEABLE PARTS INSIDE
SERVICING ONLY FOR QUALIFIED PERSONNEL
Caution