Revision 1.0
04/2015
Document No. D107-008
Page
2
of
2
3.
Additional configuration can be set using the
Target Browser
also under the
Tools
menu. Right click on the module in the Target Browser a select
Port Configuration
.
MODULE CONFIGURATION
Once the module has been assigned an Ethernet address the module will be ready to
run as a PTP and NTP time server without any further configuration. Additional
configuration can be achieved using the Aparian Slate utility.
1.
In Slate start a new project under
File, New.
2.
Add the device by selecting
Add
under the
Device
menu, and choosing the Time
Sync Module.
3.
The Configuration form open automatically. Fill in Name, Description, IP Address,
and Major Revision.
4.
Set the Primary Mode, Speed Profile, and any additional options on the advanced
tab. Click OK.
5.
Download the configuration to the module by right clicking the module in the
Project Explorer and selecting
Download
. Save the Project.
ADDITIONAL INFORMATION
Resource
Link
Slate Installation
www.aparian.com/software/slate
Time Sync User Manual
Time Sync Datasheet
Example Code & UDTs
http://www.aparian.com/products/timesync
SUPPORT
Technical support will be provided via the Web (in the form of user manuals, FAQ,
datasheets etc.) to assist with installation, operation, and diagnostics.
For additional support the user can use either of the following:
Contact Us web link
www.aparian.com/contact-us
Support email
