Revision 1.0
04/2015
Document No. D107-008
Page
1
of
2
Time Sync
Quick Start Guide
A-TSM
REQUIRED SOFTWARE
The Time Sync module requires Aparian Slate software to setup and configure. The
software installation can be found at
www.aparian.com/software/slate
.
MODULE INSTALLATION
1.
Mount GPS Antenna in a position with a clear view of the sky.
2.
Place GPS antenna Attached GPS Antenna to SMA Connector.
3.
Connect module to Ethernet Network by plugging cable into Ethernet port.
4.
The Time Sync module requires input power of 10-28Vdc. The wiring of the power
connector can be found in the wiring diagram below. Power up the module.
NETWORK SETUP
1.
Launch the Aparian Slate Configuration Software. Select the
DHCP Server
under
the
Tools
menu. DHCP is enabled as factory default.
2.
Click the
Assign
button and set the IP Address. Row turns green if successful.
