APAR AR553, Инструкция пользователя

Страница: 5 / 12

5
6. ENCLOSURE DIMENSIONS AND INSTALLATION DATA
a)
general data and dimensions of the standard version (integrated probe)
b)
dimensions for external probes in different designs
b.1) An external probe with a wire b.2.) A probe on a stainless steel pipe b.3) An external probe
AR553/2 AR553/L150 or AR553/L250 in an enclosure with a wire
AR553/3
b.4) A probe integrated with
the enclosure in the back
(channel) design AR553/T
c) installation of cabling
−
cut off the power supply before making any changes to the cabling
−
remove the 4 screws in the front cover and take it off the device
−
in version with an LCD, carefully take out display from bolt connectors (perpendicularly to the front surface)
−
terminals to connect power supply cables, outputs cables, and signal cables become accessible – see chapter 7
−
the electric cables must be inserted into the enclosure through cable glands
−
after the device has been mounted and the cabling has been installed, assemble the device carefully
performing the work in the reverse order
−
in order to achieve the IP65 rating, the nuts of the cable glands and the enclosure cover must be tightened
precisely
Enclosure type industrial IP65
Material
polycarbonate
Enclosure dimensions
58 x 94 x 35 mm
Fixing methods
2 x Φ9 mm holes, distance between the
holes 80 mm, narrower part of the hook
holder with max. diameter of 5 mm
Conductor cross-sections 1.5 mm
2