Micro-Single Production Quality, Compact SDI Converter / Scaler
APANTAC LLC,
10200 SW Allen Blvd. Suite C, Beaverton, OR 97005 USA
[email protected], TEL: +1 503 968 3000, FAX: +1 503 389 7921
34
Copywrite & Trademark
All rights reserved by APANTAC LLC, Portland, Oregon, USA. No part of this document may be
reproduced in any form or by any means without written permission from the product
manufacturer. Changes are periodically made to the information in this document. They will be
incorporated in subsequent editions. The product manufacturer may make improvements and /or
changes in the product described in this document at any time.
All the registered trademarks referred to this manual are belonging to their respective companies.
Warranty Statement
Apantac LLC (herein after referred to as “Apantac”) warrants to the original purchaser of the
products manufactured by Apantac (the “Product”) will be free from defects in material and
workmanship for a period of three (3) year from the date of shipment of the Product to the
purchaser.
If the Product proves to be defective during the three (3) year warranty period, the purchaser’s
exclusive remedy and Apantac’s sole obligation under this warranty is expressly limited, at
Apantac’s sole option, to:
(a)
repair the defective Product without charge for parts and labor or,
(b)
provide a replacement in exchange for the defective Product or,
(c)
if after a reasonable time, is unable to correct the defect or provide a replacement Product
in good working order, then the purchaser shall be entitled to recover damages subject to
the limitation of liability set forth below.
