Installation
1.
Connect the DP cable with the PC and the <IN> port
2.
Connect the DP cable with the monitor and the <OUT> ports
3.
Connect the power cord and turn on the DP-1x2-II
4.
Turn on the PC and monitor
EDID
DisplayPort splitters do not have capability of storing the EDID, so EDID is
passed from the display to the source. When there are two displays, it
will use whichever the EDID is sent first, it will use that EDID. If you
remove the displays from the splitter, the splitter will keep the last EDID
until power cycle.
Compatibility Tests
Due to the different interpretations of DisplayPort modes by different major graphics
accelerator companies, it is important to provide detail compatibility test data as follows,
Test Equipment
Graphics Card 1
GTX 1050Ti (NVIDIA, OS: WIN 10)
Graphics Card 2
Radeon RX560 (AMD: OS: WIN 7)
Display 1
Dell P2415Q
Display 2
ASUS PB287
Display 3
AOC U2849VF
Display 4
SAMSUNG LU28D590S
DisplayPort cable
LPC-1603 2m
1.
SST connection diagram
2.
SST tests
DP-1x2-II (SST MODE)
Resolutions/GFX card
OUTPUT1
OUTPUT2 OUTPUT1
OUTPUT2
GTX1050Ti
P2415Q
PB287
PB287
P2415Q
4K@60Hz
Pass
Pass
Pass
Pass
4K@30Hz
Pass
Pass
Pass
Pass
1920x1080P@60Hz
Pass
Pass
Pass
Pass
Radeon RX560
LU28D590S
U2849VF
U2849VF
LU28D590S
4K@60Hz
Pass
Pass
Pass
Pass
4K@30Hz
Pass
Pass
Pass
Pass
1920x1080P@60Hz
Pass
Pass
Pass
Pass
3.
MST connection diagram
4.
MST testing
DP-1x2-II (MST MODE)
Resolutions
/GFX card
OUTPUT1 OUTPUT2 OUTPUT1
OUTPUT2
GTX1050Ti
P2415Q
PB287
U2849VF
LU28D590S
4K@30Hz 4K@30Hz 4K@30Hz
4K@30Hz
LU28D590S
P2415Q
PB287
U2849VF
4K@30Hz 4K@30Hz 4K@30Hz
4K@30Hz
Radeon RX560
P2415Q
PB287
U2849VF
LU28D590S
No output No output No output
No output
Note: When Radeon RX560 in MST mode, there is no output
5.
DP++ testing
INPUT
Not supported
Output
Not supported
© 2019 APANTAC LLC. All rights reserved
10200 SW Allen Blvd, Suite C
Beaverton, OR 97005, USA
PHONE +1 503 968 3000, FAX +1 503 389 7921
The content of this document is provided in connection with Apantac LLC (“Apantac”)
products. Apantac makes no representation or warranties with respect to the accuracy or completeness of
the contents of this publication and reserves the right to make changes to specification and product
descriptions at any time without notice
