CLN-SW-6x1-M
APANTAC LLC, 7470 SW BRIDGEPORT ROAD, PORTLAND, OR 97224
, TEL: +1 503 968 3000, FAX: +1 503 389 7921
20
Figure 6.4: Web interface
Note: Only the video portion of the interface applies to CLN-SW-6x1-M.
Set: To set the video (input) and output matrix
OFF: Disable all outputs
Refresh: To refresh the status of the configuration. Physical button pushes on the
front panel will not correlate to the web interface in real time.
Load: Load saved presets
Scan: Search for devices that are connected. If the console list is empty, you can
click on “Scan” to update the list.
Console List: If there are more than 8 devices, click “Previous” or “Next” to view all
the devices
Upgrade: This used for FW upgrade
Options: This is where you change the IP address
Save: Saves the current status to memory (presets)
All Ouput: A short cut to set the same input to all outputs.
AV link: Not applicable here
Key In: Quick keys (0 ~99). After the value is set, click on “Enable” to take effect
Previous and Next: If there are more than 8 devices, you can page through the
console list.
6.3.1
Video Configuration
Click on Video, then “Video Settings” dialog will appear
