AP&T AP-AZ3201, Быстрый старт

Страница: 5 / 6

①
It should be placed in the work area where the static electricity is eliminated .(about 150~300mm away from the surface of the
static electricity object is better)
Static elimination angle should be perpendicular to the surface of the charged body.
②
The entire device must be reliably connected to the ground wire of the AC device and the ground resistance is less than 1 ohm.
③
The surface of the ionizing air snake is not allowed to cover other objects.
Installation tips
Dimensions
Product parameters
Model AP-AZ3201
Input voltage AC220V/50Hz or AC110V/60Hz
Working voltage AC3500V
Power 26W
Discharge distance 150
－
300mm
Ion balance ≤|±50V|
（
150mm from the front of ionizing air snake)
Discharge speed ≤1.5S
（
150mm from the front of ionizing air snake)
Noise <65db
（
150mm from the front of ionizing air snake)
Use media Clean compressed air
Air pressure 0.2—0.6MPa
Working temperature 0℃—50℃
Working humidity 30-70%RH
Air source connector ф8mm(Can be customized according to requirements)
Dimensions 156*127*117mm
（
L*W*H
）
Net weight
3350g (including power cord, photoelectric switch, clamp
ring)
Gross weight 3780g
Unit : mm